01
Tekla 3D BIM & Precision Detailing
Every project is modeled using Tekla Structures 3D BIM software. NC files exported directly to CNC cutting lines for zero-error assembly.
Tekla-modelled, CNC-cut, SAW-welded and UT-verified structural steel for warehouses, industrial workshops and crane-served buildings — documented at every production stage.
Six uncompromising technical pillars that ensure structural integrity, precise site fit-up, and long-term durability in extreme climate conditions.
01
Every project is modeled using Tekla Structures 3D BIM software. NC files exported directly to CNC cutting lines for zero-error assembly.
02
Multi-head CNC flame & plasma cutters achieve ±0.5mm cutting tolerances for steel plates up to 100mm thickness.
03
Continuous submerged arc welding lines deliver deep penetration, backed by certified Level-II ultrasonic testing.
04
8-wheel pass-through shot blasting systems achieve SA 2.5 cleanliness, matched with controlled epoxy painting bays.
05
Complex spatial trusses, canopies, and multi-story frame joints undergo 1:1 yard pre-assembly to eliminate site delays.
06
All raw steel sourced with MTC EN 10204 3.1. Full-penetration welds undergo Ultrasonic Testing (UT) by Level-II inspectors.
In-depth technical guides answering complex questions regarding steel standards, anti-corrosion selection, and container shipping.
Forensic guide to auditing structural steel BOQs: identify unearned tonnage in rolling margins, plate nesting scrap, connections, and fireproofing.
Read guide
Compare mezzanine decking: chequered steel plate vs bar grating vs cement board. Review dead weight, NFPA 13 sprinklers, diaphragm shear, and wheel capacities.
Read guide
Compare steel workshop budgets for 5-ton, 10-ton, and 20-ton overhead cranes. Learn how dynamic loads dictate runway girders, columns, and foundation CAPEX.
Read guide
Compare single-skin steel, Rockwool, PUR, and PIR sandwich panels for industrial workshops. Review U-values, fire ratings, purlin spans, and lifecycle CapEx.
Read guide
Source directly from a China structural steel factory. Audit OEM fabricators, verify AWS/EN welding, compare steel grades, and inspect NDT & coating quality.
Read guide
Turnkey industrial steel structure guide: FEED engineering, Tekla LOD 400, CNC fabrication, AWS D1.1 welding, ISO 12944 coatings, and global EPC delivery.
Read guide
Avoid costly field rework in prefab steel structure warehouse procurement. Master metallurgy equivalency, container limits, and AISC baseplate tolerances.
Read guide
Top galvanized portal frame steel structure manufacturer guide: inspect clear spans (12-48m), Sandelin chemistry, HDG coatings, and AISC/EN 1090-2 standards.
Read guideOne fabrication line, four code systems. Drawings, welding procedures and coating records are issued against the governing standard of the destination market.
| Standard region | Design & welding code | Steel grade equivalent | Galvanizing / coating code |
|---|---|---|---|
| Chinese codeGB | GB 50205-2020 / GB 50017 | Q235B / Q355B / Q355D | GB/T 13912 |
| European standardEN | EN 1090-2 (EXC2 & EXC3) / EN 1993 | S235JR / S355JR / S355J2 | EN ISO 1461 / ISO 12944 |
| American standardASTM / AISC | AISC 360 / AWS D1.1 | ASTM A36 / A572 Grade 50 | ASTM A123 / SSPC surface prep |
| Australian standardAS / NZS | AS 4100 / AS/NZS 1554.1 | Grade 250 / Grade 350 / Grade 350L15 | AS/NZS 4680 |
Upload your DWG or Tekla IFC files today. Our senior structural engineers will perform a 3D clash review and provide a detailed BOQ within 24 hours.