1. Tekla model
  2. CNC cut
  3. SAW weld
  4. UT & NDT
  5. Pre-assembly
Est. 2005

Engineering Excellence & Global Standards

Tekla-modelled, CNC-cut, SAW-welded and UT-verified structural steel for warehouses, industrial workshops and crane-served buildings — documented at every production stage.

CNC plasma and multi-head flame cutting line at the Xin Qiao fabrication plant
Fig. 01 — CNC profiling line Taian · CN
Facility
60,000 m²Taian, Shandong
Annual output
40,000 tper year
Governing codes
EN 1090-2 · AISC 360AWS D1.1
Detailing team
20+engineers
§ 01

Core Engineering Capabilities

Six uncompromising technical pillars that ensure structural integrity, precise site fit-up, and long-term durability in extreme climate conditions.

Tekla Structures 3D BIM model of a steel frame with clash detection 01

Tekla 3D BIM & Precision Detailing

Every project is modeled using Tekla Structures 3D BIM software. NC files exported directly to CNC cutting lines for zero-error assembly.

100% clash detection
High-precision CNC plasma and multi-head flame cutting equipment 02

High-Precision CNC Profiling

Multi-head CNC flame & plasma cutters achieve ±0.5mm cutting tolerances for steel plates up to 100mm thickness.

±0.5 mm cutting tolerance
Twin-arc gantry submerged arc welding line 03

Twin-Arc Gantry SAW Welding

Continuous submerged arc welding lines deliver deep penetration, backed by certified Level-II ultrasonic testing.

AWS D1.1 & EN 1090-2
Eight-wheel shot blasting and epoxy spray painting facility 04

SA 2.5 Shot Blasting & Coating

8-wheel pass-through shot blasting systems achieve SA 2.5 cleanliness, matched with controlled epoxy painting bays.

SA 2.5 surface tested
1:1 factory trial pre-assembly of a steel structure 05

1:1 Factory Trial Pre-Assembly

Complex spatial trusses, canopies, and multi-story frame joints undergo 1:1 yard pre-assembly to eliminate site delays.

Zero on-site rework
Ultrasonic non-destructive testing of full-penetration welds 06

Strict QA/QC & NDT Inspection

All raw steel sourced with MTC EN 10204 3.1. Full-penetration welds undergo Ultrasonic Testing (UT) by Level-II inspectors.

100% ultrasonic testing
§ 02

Technical Insights & Compliance Guides

In-depth technical guides answering complex questions regarding steel standards, anti-corrosion selection, and container shipping.

Hot-Dip Galvanized Steel Poultry House: B2B Buyer's Guide
Steel Structure

Hot-Dip Galvanized Steel Poultry House: B2B Buyer's Guide

Hot-dip galvanized prefab steel poultry house buyer's guide: zinc mass, steel grade, R-value, wind/snow loads, cost per bird place, and supplier vetting.

Read guide
Multi-Story Prefabricated Steel Office Building Buyer's Guide
Steel Buildings

Multi-Story Prefabricated Steel Office Building Buyer's Guide

A buyer's guide to multi-story prefabricated steel office buildings: cost drivers, floor systems, structural options, a case study, and procurement checklists.

Read guide
Prefabricated Steel Structure Workshop with Overhead Crane: Buyer's Guide
Prefabricated Steel Buildings

Prefabricated Steel Structure Workshop with Overhead Crane: Buyer's Guide

Learn how to specify a crane-ready prefabricated steel workshop: capacity, span, duty class, runway beams, foundations, costs, and supplier checks.

Read guide
Large Clear Span Prefabricated Steel Structure Warehouse: Specs, Limits & Costs
Steel Buildings

Large Clear Span Prefabricated Steel Structure Warehouse: Specs, Limits & Costs

Can a prefab steel warehouse be column-free? Compare 150–480 ft span tiers, engineering loads, costs, and supplier checks before you buy.

Read guide
Fireproof Rockwool Roof Sandwich Panels for PEB Buildings
Pre-Engineered Buildings

Fireproof Rockwool Roof Sandwich Panels for PEB Buildings

A buyer's guide to fireproof rockwool roof sandwich panels for PEB buildings: fire classes, EI60/EI120, density, U-value, compliance, and RFQ checklist.

Read guide
Pre-Engineered Building Basketball Arena: Verify Before You Buy
Pre-Engineered Steel Buildings

Pre-Engineered Building Basketball Arena: Verify Before You Buy

Verify a pre-engineered building basketball arena on engineering, not brochures: AISC 360, ASCE 7 loads, clear span, tolerances, scope and cost drivers.

Read guide
Temporary vs Permanent Modular Pre-Engineered Steel Bridge
Steel Bridges

Temporary vs Permanent Modular Pre-Engineered Steel Bridge

Compare temporary vs permanent modular pre-engineered steel bridges by design life, load rating, superstructure, deck, finish, abutments, and erection.

Read guide
Pre-Engineered Building Cold Room: Structural Loads & Envelope
Cold Storage Buildings

Pre-Engineered Building Cold Room: Structural Loads & Envelope

Pre-engineered building cold rooms engineered with ASCE 7 loads, AISC 360 checks, vapor barriers, thermal breaks, freezer slabs, rooftop refrigeration, cost.

Read guide
§ 03

International Structural Code Compliance

One fabrication line, four code systems. Drawings, welding procedures and coating records are issued against the governing standard of the destination market.

Standard region Design & welding code Steel grade equivalent Galvanizing / coating code
Chinese codeGB GB 50205-2020 / GB 50017 Q235B / Q355B / Q355D GB/T 13912
European standardEN EN 1090-2 (EXC2 & EXC3) / EN 1993 S235JR / S355JR / S355J2 EN ISO 1461 / ISO 12944
American standardASTM / AISC AISC 360 / AWS D1.1 ASTM A36 / A572 Grade 50 ASTM A123 / SSPC surface prep
Australian standardAS / NZS AS 4100 / AS/NZS 1554.1 Grade 250 / Grade 350 / Grade 350L15 AS/NZS 4680

Have structural drawings or need a technical evaluation?

Upload your DWG or Tekla IFC files today. Our senior structural engineers will perform a 3D clash review and provide a detailed BOQ within 24 hours.

Input
DWG · Tekla IFC
Deliverable
BOQ + 3D clash review
Turnaround
Within 24 hours
Confidentiality
NDA on request