01
Tekla 3D BIM & Precision Detailing
Every project is modeled using Tekla Structures 3D BIM software. NC files exported directly to CNC cutting lines for zero-error assembly.
Tekla-modelled, CNC-cut, SAW-welded and UT-verified structural steel for warehouses, industrial workshops and crane-served buildings — documented at every production stage.
Six uncompromising technical pillars that ensure structural integrity, precise site fit-up, and long-term durability in extreme climate conditions.
01
Every project is modeled using Tekla Structures 3D BIM software. NC files exported directly to CNC cutting lines for zero-error assembly.
02
Multi-head CNC flame & plasma cutters achieve ±0.5mm cutting tolerances for steel plates up to 100mm thickness.
03
Continuous submerged arc welding lines deliver deep penetration, backed by certified Level-II ultrasonic testing.
04
8-wheel pass-through shot blasting systems achieve SA 2.5 cleanliness, matched with controlled epoxy painting bays.
05
Complex spatial trusses, canopies, and multi-story frame joints undergo 1:1 yard pre-assembly to eliminate site delays.
06
All raw steel sourced with MTC EN 10204 3.1. Full-penetration welds undergo Ultrasonic Testing (UT) by Level-II inspectors.
In-depth technical guides answering complex questions regarding steel standards, anti-corrosion selection, and container shipping.
Hot-dip galvanized prefab steel poultry house buyer's guide: zinc mass, steel grade, R-value, wind/snow loads, cost per bird place, and supplier vetting.
Read guide
A buyer's guide to multi-story prefabricated steel office buildings: cost drivers, floor systems, structural options, a case study, and procurement checklists.
Read guide
Learn how to specify a crane-ready prefabricated steel workshop: capacity, span, duty class, runway beams, foundations, costs, and supplier checks.
Read guide
Can a prefab steel warehouse be column-free? Compare 150–480 ft span tiers, engineering loads, costs, and supplier checks before you buy.
Read guide
A buyer's guide to fireproof rockwool roof sandwich panels for PEB buildings: fire classes, EI60/EI120, density, U-value, compliance, and RFQ checklist.
Read guide
Verify a pre-engineered building basketball arena on engineering, not brochures: AISC 360, ASCE 7 loads, clear span, tolerances, scope and cost drivers.
Read guide
Compare temporary vs permanent modular pre-engineered steel bridges by design life, load rating, superstructure, deck, finish, abutments, and erection.
Read guide
Pre-engineered building cold rooms engineered with ASCE 7 loads, AISC 360 checks, vapor barriers, thermal breaks, freezer slabs, rooftop refrigeration, cost.
Read guideOne fabrication line, four code systems. Drawings, welding procedures and coating records are issued against the governing standard of the destination market.
| Standard region | Design & welding code | Steel grade equivalent | Galvanizing / coating code |
|---|---|---|---|
| Chinese codeGB | GB 50205-2020 / GB 50017 | Q235B / Q355B / Q355D | GB/T 13912 |
| European standardEN | EN 1090-2 (EXC2 & EXC3) / EN 1993 | S235JR / S355JR / S355J2 | EN ISO 1461 / ISO 12944 |
| American standardASTM / AISC | AISC 360 / AWS D1.1 | ASTM A36 / A572 Grade 50 | ASTM A123 / SSPC surface prep |
| Australian standardAS / NZS | AS 4100 / AS/NZS 1554.1 | Grade 250 / Grade 350 / Grade 350L15 | AS/NZS 4680 |
Upload your DWG or Tekla IFC files today. Our senior structural engineers will perform a 3D clash review and provide a detailed BOQ within 24 hours.